Ce câble coaxial blanc assemblé est conseillé pour transmettre des signaux radiofréquences.
Il convient particulièrement aux répéteurs GSM.
Sa gamme de fréquences va de 0 à 3 GHz.
Destiné aux applications rigoureuses, ce câble offre une faible perte de signal, comparable à celui des câbles en cuivre ondulé. Mais contrairement à eux, il est flexible.
Il dispose de deux connecteurs N-Mâle notamment compatibles avec notre gamme d’amplificateurs GSM et antennes.
Avantages :
– Connexion simplifiée
– Faible perte de signal
– Flexible
Spécifications techniques
| Inner Conductor | BC |
| Conductor Dia. | 1.12 +/-0.02 mm |
| Min. Break Strength | 453 N |
| Insulation | Foam P.E |
| Insulation Dia. | 2.95 +/-0.15 mm |
| Color | White |
| Centricity | ≥ 85% |
| Adhesion | 10 to 100N @ 25 mm |
| Shielding | AL/P-Foil (Bonded) |
| Foil overlap | ≥ 120 % |
| Outer Conductor | TC Wire Braid |
| Coverage | 90 +/-3% |
| Jacket | FR-PVC |
| Outer Dia. | 4.95 +/-0.15mm |
Mechanical Characteristics | |
| Min. Bending Radius: | |
| Installation | 12.7 mm |
| Repeated | 50.8 mm |
| Max. Pulling Tension | 245 |
| Crush resistance of cable (load of 700N) | < 1 % |
| Rated Temperature | |
| Storage/operating temperature | -40~+85℃ |
| Outdoor Installation | -40~+85℃ |
Electrical Characteristics | |
| Impedance | 50± 2 ohm |
| Capacitance | 78pF/m |
| Velocity ratio | 84% |
| DCR: Inner Conductor | < 17.6 ohm/km |
| DCR: Outer Conductor | < 16.1 ohm/km |
| Jacket Sparker | 3000 V RMS |
| Dielectric Strength | 1000 V DC |
| Insulation resistance | > 10,000МΩ·km |
| Peak Power | 2.5 KW |
| Shielding Effectiveness | >90 dB |
| VSWR | 30-2500 MHz <1.20 |
| Attenuation (at 20 ℃) | dB/100m |
| 30MHz | 5.80 |
| 50 MHz | 7.50 |
| 150 MHz | 13.10 |
| 220 MHz | 15.90 |
| 450 MHz | 22.80 |
| 900 MHz | 32.60 |
| 1500 MHz | 42.40 |
| 1800 MHz | 46.60 |
| 2000 MHz | 49.30 |
| 2500 MHz | 55.40 |
| 5800 MHz | 86.50 |
Avis
Il n’y a pas encore d’avis.